Displaying And Maintaining Netstream - H3C SR6600-X Configuration Manual

Step
2. Enter NetStream
aggregation mode view.
3. Specify a destination
host for NetStream
aggregation data
export.
4. (Optional.) Specify the
source interface for
NetStream data packets
sent to NetStream
servers.
5. Enable NetStream
aggregation.

Displaying and maintaining NetStream

Execute display commands in any view and reset commands in user view.
Task
Display NetStream entry information in the cache
(in standalone mode).
Display NetStream entry information in the cache
(in IRF mode).
Display information about the NetStream data
export.
Display the configuration and status of the
NetStream templates (in standalone mode).
Display the configuration and status of the
NetStream templates (in IRF mode).
Age out and export all NetStream data, and
clear the cache.
Command
ip netstream aggregation { as |
destination-prefix | prefix |
prefix-port | protocol-port |
source-prefix | tos-as |
tos-bgp-nexthop |
tos-destination-prefix | tos-prefix |
tos-protocol-port | tos-source-prefix }
ip netstream export host ip-address
udp-port [ vpn-instance
vpn-instance-name ]
ip netstream export source interface
interface-type interface-number
enable
Command
display ip netstream cache [ slot slot-number ] [ verbose ]
display ip netstream cache [ chassis chassis-number slot
slot-number ] [ verbose ]
display ip netstream export
display ip netstream template [ slot slot-number ]
display ip netstream template [ chassis chassis-number slot
slot-number ]
reset ip netstream statistics
218
Remarks
N/A
By default, no destination host is
specified.
If you expect only NetStream
aggregation data, specify the
destination host only in the related
NetStream aggregation mode view.
By default, no source interface is
specified for NetStream data
packets. The packets take the primary
IP address of the output interface as
the source IP address.
Source interfaces in different
NetStream aggregation mode views
can be different.
If no source interface is configured in
NetStream aggregation mode view,
the source interface configured in
system view applies.
By default, NetStream aggregation is
disabled.