Debugging A Feature Module - H3C SR6600-X Configuration Manual

Debugging a feature module

Output of debugging commands is memory intensive. To guarantee system performance, enable
debugging only for modules that are in an exceptional condition. When debugging is complete, use the
undo debugging all command to disable all the debugging functions.
To debug a feature module:
Step
1. Enable debugging for a
module in user view.
2. (Optional.) Display the
enabled debugging in any
view.
Command
debugging { all [ timeout time ] |
module-name [ option ] }
display debugging
[ module-name ]
7
Remarks
By default, all debugging functions
are disabled.
N/A