Ethernet Statistics Group Configuration Example; Network Requirements; Configuration Procedure - H3C SR6600-X Configuration Manual

Task
Display RMON private alarm
entries.
Display RMON event entries.
Display log information for
event entries.

Ethernet statistics group configuration example

Network requirements

As shown in
statistics for GigabitEthernet 2/0/1.
Figure 56 Network diagram

Configuration procedure

# Create an RMON Ethernet statistics entry for GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1
# Display statistics collected for GigabitEthernet 2/0/1.
<Sysname> display rmon statistics gigabitethernet 2/0/1
EtherStatsEntry 1 owned by user1 is VALID.
Interface : GigabitEthernet2/0/1<ifIndex.3>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Incoming packets by size:
64 : 235
256-511: 1
# Get the traffic statistics from the NMS through SNMP. (Details not shown.)
Command
display rmon prialarm [ entry-number ]
display rmon event [ entry-number ]
display rmon eventlog [ entry-number ]
Figure 56, create an RMON Ethernet statistics entry on the device to gather cumulative traffic
: 21657
: 56
: 0
: 0
, 65-127
, 512-1023: 0
, etherStatsPkts
, etherStatsMulticastPkts : 34
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
: 67 , 128-255
, 1024-1518: 0
177
: 307
: 0
: 0
: 0
: 4