H3C SR6600-X Configuration Manual page 259

Field
Timestamp
Hostip
Serial number
Sysname (host name or
host IP address)
%% (vendor ID)
vv (version information)
Module
Level
Mnemonic
Source
Content
Table 23 Timestamp precisions and configuration commands
Item Destined to the log host
Precision Seconds
Command
used to set the
info-center timestamp loghost
timestamp
format
Description
Records the time when the log was generated.
Logs sent to the log host and those sent to the other destinations have different
timestamp precisions, and their timestamp formats are configured with different
commands. For more information, see
Source IP address of the log. If info-center loghost source is configured, this field
displays the IP address of the specified source interface. Otherwise, this field
displays the sysname.
This field exists only in logs in unicom format that are sent to the log host.
Serial number of the device that generated the log.
This field exists only in logs in unicom format that are sent to the log host.
The sysname is the host name or IP address of the device that generated the log.
You can use the sysname command to modify the name of the device.
Indicates that the information was generated by an H3C device.
This field exists only in logs sent to the log host.
Identifies the version of the log, and has a value of 10.
This field exists only in logs that are sent to the log host.
Specifies the name of the module that generated the log. You can enter the
info-center source ? command in system view to view the module list.
Identifies the level of the log. See
levels.
Describes the content of the log. It contains a string of up to 32 characters.
Identifies the source of the log. It can take one of the following values:
•
Slot number of a card. (In standalone mode.)
•
IRF member ID and card slot number. (In IRF mode.)
•
IP address of the log sender.
Provides the content of the log.
245
Table 23 and Table
Table 14 for more information about severity
Destined to the console, monitor
terminal, log buffer, and log file
Milliseconds
info-center timestamp
24.