Configuring Ntp Authentication In Broadcast Mode - H3C SR6600-X Configuration Manual

Active peer
Enable NTP
authentication
Yes
Yes
Yes
Yes
Yes
No
No
The active peer has a higher stratum than the passive peer.
Yes
The passive peer has a higher stratum than the active peer.
Yes
Yes

Configuring NTP authentication in broadcast mode

When you configure NTP authentication in broadcast mode:
Enable NTP authentication.
•
Configure an authentication key.
•
Configure a Associate
key and the key
configure it with a
as a trusted passive
peer
key
Yes Yes
Yes Yes
Yes Yes
N/A No
N/A No
N/A N/A
N/A N/A
No Yes
No Yes
No Yes
Passive peer
Configure a
key and
Enable NTP
configure it
authentication
as a trusted
key
Yes Yes
Yes No
No N/A
Yes N/A
No N/A
Yes N/A
No N/A
N/A N/A
Yes N/A
No N/A
80
Authentication result
Succeeded. NTP
messages can be sent
and received correctly.
Failed. NTP messages
cannot be sent and
received correctly.
Failed. NTP messages
cannot be sent and
received correctly.
Failed. NTP messages
cannot be sent and
received correctly.
No authentication.
NTP messages can be
sent and received
correctly.
Failed. NTP messages
cannot be sent and
received correctly.
No authentication.
NTP messages can be
sent and received
correctly.
Failed. NTP messages
cannot be sent and
received correctly.
Failed. NTP messages
cannot be sent and
received correctly.
No authentication.
NTP messages can be
sent and received
correctly.