H3C SR6600-X Configuration Manual page 172

Step
4. (Optional.) Configure
the system location.
5. Enable SNMPv1 or
SNMPv2c.
6. (Optional.) Change
the local engine ID.
7. (Optional.) Create or
update a MIB view.
8. Configure the SNMP
access right.
9. (Optional.) Create an
SNMP context.
Command
snmp-agent sys-info location sys-location
snmp-agent sys-info version { all | { v1 |
v2c } *}
snmp-agent local-engineid engineid
snmp-agent mib-view { excluded |
included } view-name oid-tree [ mask
mask-value ]
•
(Method 1.) Create an SNMP
community:
In VACM mode:
snmp-agent community { read |
write } [ simple | cipher ]
community-name [ mib-view
view-name ] [ acl acl-number | acl
ipv6 ipv6-acl-number ] *
In RBAC mode:
snmp-agent community [ simple |
cipher ] community-name user-role
role-name [ acl acl-number | acl ipv6
ipv6-acl-number ] *
•
(Method 2.) Create an SNMPv1/v2c
group, and add users to the group:
a. snmp-agent group { v1 | v2c }
group-name [ read-view
view-name ] [ write-view
view-name ] [ notify-view
view-name ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
b. snmp-agent usm-user { v1 | v2c }
user-name group-name [ acl
acl-number | acl ipv6
ipv6-acl-number ] *
snmp-agent context context-name
158
Remarks
The default system location is
Hangzhou, China.
By default, SNMPv3 is enabled.
By default, the local engine ID is
the company ID plus the device ID.
By default, the MIB view
ViewDefault is predefined. In this
view, all the MIB objects in the iso
subtree but the snmpUsmMIB,
snmpVacmMIB, and
snmpModules.18 subtrees are
accessible.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB sub-tree masks
multiple times, the most recent
configuration takes effect. Except
for the four sub-trees in the default
MIB view, you can create up to 16
unique MIB view records.
By default, no SNMP group or
SNMP community exists.
The username in method 2 has the
same purpose as the community
name in method 1. Whichever
method you use, make sure the
configured name is the same as the
community name on the NMS.
By default, no SNMP context is
configured on the device.