Configuring Optional Parameters For The Nqa Operation - H3C SR6600-X Configuration Manual

Step
5. (Optional.) Specify the payload
size in each ICMP echo request.
6. (Optional.) Specify the string to
be filled in the payload of each
ICMP echo request.
7. Specify the source IP address of
ICMP echo requests.
8. (Optional.) Specify the number
of ICMP echo requests to be sent
in a path jitter operation.
9. (Optional.) Specify the interval
for sending ICMP echo requests.
10. (Optional.) Specify how long
the NQA client waits for a
response from the server before
it regards the response times
out.
11. (Optional.) Specify an LSR path.
12. (Optional.) Perform the path
jitter operation only on the
destination address.

Configuring optional parameters for the NQA operation

Unless otherwise specified, the following optional parameters apply to all types of NQA operations.
To configure optional parameters for an NQA operation:
Step
1. Enter system view.
2. Create an NQA
operation and enter NQA
operation view.
3. Specify an NQA
operation type and enter
its view.
4. Configure a description.
Command
data-size size
data-fill string
source ip ip-address
probe packet-number
packet-number
probe packet-interval
packet-interval
probe packet-timeout
packet-timeout
lsr-path ip-address&<1-8>
target-only
Command
system-view
nqa entry admin-name
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | path-jitter |
snmp | tcp | udp-echo |
udp-jitter | udp-tracert |
voice }
description text
25
Remarks
The default setting is 100 bytes.
The default setting is the hexadecimal
number
00010203040506070809.
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
ICMP echo requests can be sent out.
The default setting is 10.
The default setting is 20 milliseconds.
The default setting is 3000
milliseconds.
By default, no LSR path is specified.
The path jitter operation uses the
tracert to detect the LSR path to the
destination, and sends ICMP echo
requests to each hop on the LSR.
By default, the path jitter operation is
performed on each hop on the path
to the destination.
Remarks
N/A
By default, no NQA operation is created.
N/A
By default, no description is configured.