Removal And Disassembly - Suzuki Intruder VZR1800 Service Manual

REMOVAL AND DISASSEMBLY

• Remove the front wheel. (!9-9)
• Remove the bolts, left and right and front fender.
• Remove the fasteners 1 and bolts 2.
• Remove the head light assembly and disconnect the cou-
plers.
• Loosen the front fork upper clamp bolt 3.
NOTE:
Slightly loosen the front fork cap bolts 4 before loosening the
lower clamp bolts to facilitate later disassembly.
• Loosen the front fork lower clamp bolts.
• Remove the front fork.
NOTE:
Hold the front fork by the hand to prevent sliding out of the steer-
ing stem.
• Separate the front fork cap bolt from the front fork outer tube.
• Compress the front fork spring with the special tool A and
insert the special tool B between the lock nut and the spacer.
% 09940-94930: Front fork spacer holder A
09940-94922: Stopper plate B (11 mm)
CHASSIS 9-15