Suzuki Intruder VZR1800 Service Manual page 80

3-28 ENGINE
NOTE:
* The crankshaft and transmission components should remain
in the upper crankcase half.
* If it is difficult to separate the crankcase halves, set the proper
bolts and nuts to the crankcase by separating the upper and
lower crankcase halves, as shown in the illustration.
TRANSMISSION
• Remove the driveshaft assembly 1 and countershaft assem-
bly 2.
• Remove the O-rings 3 and dowel pin 4.
BALANCER SHAFT
• Remove the oil seal 1 and balancer shaft 2.
CRANKSHAFT
• Remove the O-ring 1 and dowel pins 2.
• Remove the crankshaft 3 and thrust bearing 4.