Suzuki Intruder VZR1800 Service Manual page 388

REAR WHEEL
• Install the spacer 1.
• Apply SUZUKI SUPER GREASE "A" to the final gear spline
before installing the rear wheel.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Remount the rear wheel, rear axle and coller.
• Install the washer and rear axle nut.
• Install the brake caliper with the caliper bracket.
• Tighten the rear axle nut 1 to the specified torque with the
special tool.
% 09944-28320: Hexagon socket
# Rear axle nut
(For E-03, 28, 33): 100 N·m (10.0 kgf-m, 72.5 lb-ft)
(For others):
• Tighten the brake caliper bracket mounting bolt 2 to the
specified torque.
# Brake caliper bracket mounting bolt:
NOTE:
After remounting the rear wheel, check for proper brake opera-
tion.
110 N·m (11.0 kgf-m, 79.5 lb-ft)
80 N·m (8.0 kgf-m, 58.0 lb-ft)
or equivalent
CHASSIS 9-39