Suzuki Intruder VZR1800 Service Manual page 163

• Apply engine oil to the new O-ring and install the generator
cover plug.
"
Use the new O-ring to prevent oil leakage.
• Tighten the generator cover plug 2 and valve timing inspec-
tion plug 3 to the specified torque.
# Generator cover plug: 16 N·m (1.6 kgf-m, 11.5 lb-ft)
Valve timing inspection plug:
• Install the generator cover cap 4.
CLUTCH COVER
• Loosen the lock nut 1 and turn in the release screw 2 to feel
resistance.
• From that position, turn out the release screw 2 1 turn and
tighten the lock nut 1 securely by holding the release screw
2.
• Install the dowel pins and gasket 3.
"
Use the new gasket to prevent oil leakage.
23 N·m (2.3 kgf-m, 16.5 lb-ft)
ENGINE 3-111