Suzuki Intruder VZR1800 Service Manual page 67

• Turn the crankshaft to bring the "R I T" line on generator rotor
to the index mark of the valve inspection hole and also to
bring the cams to the position as shown.
NOTE:
At the above condition, the rear cylinder is at TDC of compres-
sion stroke and also the engraved lines A on the camshafts are
parallel with the mating surface of the cylinder head cover.
• Remove the cam chain tension adjuster cap bolt 4 and
spring.
• Remove the rear cam chain tension adjuster No. 2 5 and
gasket.
• Remove the cam chain guide No. 3 6.
• Remove the camshaft journal holder 7.
• Remove the dowel pins.
"
Be sure to loosen the camshaft journal holder bolts
evenly by shifting the wrench in the descending order
of numbers.
• Remove the intake camshaft 8.
• Remove the exhaust camshaft 9.
ENGINE 3-15
R T