Installation - Suzuki Intruder VZR1800 Service Manual

7-10 EXHAUST SYSTEM
• Remove the exhaust pipes 6 and the No. 2 muffler 7.

INSTALLATION

Install the exhaust pipe and muffler in the reverse order of
removal. Play attention to the following points:
• Install the exhaust pipes 1 with the No. 2 muffler 2.
#
Replace the gaskets with new ones.
• Tighten the exhaust pipe bolts and No. 2 muffler bolts and nut
to the specified torque.
$ Exhaust pipe bolt : 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting bolt and nut: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Apply gas sealer to the exhaust pipe connectors.
EXHAUST GAS SEALER: PERMATEX 1372
#
Replace the exhaust pipe connector with new ones.
Apply PREMATEX 1372.