3-82
ENGINE
• Tighten the crankcase bolts a little at a time to equalize the
pressure.
NOTE:
* Fit the new copper washers to the crankcase bolts B.
* Fit the new gasket washers to the crankcase bolts C.
# Crankcase bolt: (M6): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
(M8): 26 N·m (2.6 kgf-m, 19.0 lb-ft)
(M10) Initial: 30 N·m (3.0 kgf-m, 21.5 lb-ft)
"
Use the new copper washers and new gasket washers
to prevent oil leakage.
Final: 50 N·m (5.0 kgf-m, 36.0 lb-ft)