Suzuki Intruder VZR1800 Service Manual page 135

• Apply SUZUKI BOND to the mating surface of the breather
cover.
- 99000-31140: SUZUKI BOND "1207B" or equivalent
NOTE:
Use of SUZUKI BOND is as follows:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the breater cover within few minutes.
* Apply to distorted surfaces as it forms a comparatively thick
film.
• Tighten the breather cover bolts.
• Check that the driveshaft and countershaft rotate smoothly.
ENGINE 3-83