Final Gear Shims Adjustment - Suzuki Intruder VZR1800 Service Manual

4-20 DRIVELINE/AXLE

FINAL GEAR SHIMS ADJUSTMENT

FINAL GEAR BEARING CASE SHIM CLEARANCE
• Install the final driven gear, shims (1 and 2) and final gear
bearing case to the final gear case.
• Tighten the final gear case bolts to the specified torque.
! Final gear case bolt (M8): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
It is not necessary to apply SUZUKI BOND "1207B" and
THREAD LOCK to the matching surface and bolts at this stage.
• Measure the clearance between the shims and bearing. If it is
not within the specification, the shims must be changed.
Standard
% Final gear case shim clearance
Standard: 0.1 mm (0.04 in)
Shims 2 specifications
Part number
27327-38B00-035
27327-38B00-040
27327-38B00-050
27327-38B00-060
NOTE:
The shims 2 are available as a set (27327-38810).
(M10): 50 N·m (5.0 kgf-m, 36.0 lb-ft)
Shim thickness
0.35 mm (0.014 in)
0.40 mm (0.016 in)
0.50 mm (0.020 in)
0.60 mm (0.024 in)
(M10)