Suzuki Intruder VZR1800 Service Manual page 387

9-38 CHASSIS
BRAKE DISC
• Make sure that the brake disc is clean and free of any greasy
matter.
• Apply THREAD LOCK SUPER to the disc mounting bolts and
tighten them to the specified torque.
# Brake disc bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
( 99000-32130: THREAD LOCK SUPER "1360"
WHEEL DAMPER
• Install the dampers.
NOTE:
If soap water is applied around the damper, it makes the job
easier.
DRIVEN HUB JOINT
• Install the new O-ring 1 and driven hub joint 2.
NOTE:
* Apply SUZUKI SUPER GREASE "A" to the O-ring and the final
gear spline before installing the driven joint.
* Align the driven joint flat surface A with the screw holes B of
wheel.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Apply THREAD LOCK SUPER to the thread of driven hub
joint bolts.
, 99000-32030: THREAD LOCK SUPER "1303"
• Tighten the driven hub joint bolts securely.
• Bend up the washer to lock the bolts.
or equivalent
or equivalent
or equivalent