Suzuki Intruder VZR1800 Service Manual page 114

3-62 ENGINE
• Remove the gearshift cam bearing with the special tools.
% 09923-74511: Bearing remover
09930-30104: Sliding shaft
Installation
• Install the bearings with the special tool.
% 09913-70210: Bearing installer set (1 +20)
NOTE:
The stamped mark side of the gearshift shaft bearing 1 and
gearshift cam bearing 2 faces outside.
• Install the gearshift cam 3 with the bearing 4.
NOTE:
The stamped mark side of the gearshift cam bearing faces out-
side.
• Install the gearshift forks and their shafts as shown.
(2 +32)
5 For 4th drive gear
6 For 3rd driven gear
7 For 5th driven gear