Suzuki Intruder VZR1800 Service Manual page 157

REAR CAMSHAFTS
• From the position where the front camshafts have now been
installed, rotate the generator rotor approx. 2/3 turn (234°)
and align the "R I T" line A on the crankshaft with the index
marks B of the upper crankcase hole.
"
* Pull the cam chain upward, or the chain will be
caught between crankcase and cam drive sprocket.
* To adjust the camshaft timing correctly, be sure to
align "R I T" line A with the index mark B and hold
this position when installing the camshafts.
• The camshafts are identified by the embossed letters.
• Before replacing the camshafts on cylinder head, apply
MOLYBDENUM OIL SOLUTION to their journals and cam
faces.
• Apply a MOLYBDENUM OIL SOLUTION to the camshaft jour-
nal holders.
( MOLYBDENUM OIL SOLUTION
NOTE:
Before installing the camshaft, check that the tappets are
installed correctly.
ENGINE 3-105