Suzuki Intruder VZR1800 Service Manual page 77

• Remove the gearshift cam plate 3.
• Remove the gearshift cam stopper 4.
SECONDARY DRIVE GEAR
• Shift the gear position to 1st or 2nd.
• Hold the primary driven gear with the special tool.
% 09930-44541: Rotor holder
• Remove the secondary drive gear bolt.
• Secondary drive gear 1 removal. (!3-28)
SECONDARY DRIVE GEAR SERVICING (!4-10)
PRIMARY DRIVEN GEAR
• Hold the primary driven gear with the special tool and remove
the primary driven gear bolt.
% 09930-44541: Rotor holder
• Remove the primary driven gear 1.
OIL PUMP DRIVEN GEAR AND DRIVE GEAR
• Remove the snap ring 1.
• Remove the oil pump driven gear 2.
NOTE:
Do not drop the snap ring 1 into the crankcase.
• Remove the pin 3 and washer 4.
NOTE:
Do not drop the pin 3 and washer 4 into the crankcase.
ENGINE 3-25