Suzuki Intruder VZR1800 Service Manual page 160

3-108 ENGINE
• Install the gasket 5 and cam chain tension adjuster cap bolt
6.
NOTE:
Click sound is heard when the cam chain tension adjuster cap
bolt is installed.
• Tighten the cam chain tension adjuster cap bolt to the speci-
fied torque.
# Cam chain tension adjuster cap bolt:
"
After installing the cam chain tension adjuster, check
to be sure that the adjuster works properly by check-
ing the slack of cam chain.
FRONT CAM CHAIN TENSION ADJUSTER
• The cam chain tension adjuster are identified by the
embossed letters (F-UP).
• Retract the push rod by pushing the stopper 1.
• Install a new gasket 2.
"
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster 3 and tighten its
mounting bolts.
# Cam chain tension adjuster mounting bolt:
• Install the spring 4.
23 N·m (2.3 kgf-m, 16.5 lb-ft)
10 N·m (1.0 kgf-m, 7.0 lb-ft)