Suzuki Intruder VZR1800 Service Manual page 149

• Install the drive plate No. 2 7, spring washer 8 and spring
washer seat 9 onto the clutch sleeve hub correctly.
NOTE:
The conical curve side of spring washer 8 faces outside.
• Insert the clutch drive plates and driven plates one by one to
the clutch sleeve hub after applying engine oil to the them.
• Install the clutch push rod release ball 0 and clutch push rod
A into the countershaft.
• Install the clutch push piece B, bearing C and thrust washer
D.
ENGINE 3-97