Reassembly And Installation - Suzuki Intruder VZR1800 Service Manual

9-36 CHASSIS
• Remove the wheel bearings on both sides with the special
tool.
% 09921-20240: Bearing remover set (25 mm)
$
The removed bearings should be replaced with new
ones.

REASSEMBLY AND INSTALLATION

Reassemble and install the rear wheel in the reverse order of
removal and disassembly. Pay attention to the following points:
Left Right
110 N·m
(11.0 kgf-m, 79.5 lb-ft)
100 N·m
(10.0 kgf-m, 72.5 lb-ft)
23 N·m
(2.3 kgf-m, 16.5 lb-ft)
E-02, 19, 24
E-03, 28, 33