Suzuki Intruder VZR1800 Service Manual page 164

3-112 ENGINE
• Install the clutch cover and tighten its bolts.
NOTE:
Fit the new gasket washers to the bolts A.
"
Use a new gasket washer to prevent oil leakage.
THERMOSTAT
• Apply engine coolant to the O-ring.
"
Use a new O-ring to prevent engine coolant leakage.
• Install the thermostat assembly 1 and connect the water
hoses 2.
• Tighten the thermostat assembly bolt.
INTAKE PIPE
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
) 99000-25010: SUZUKI SUPER GREASE "A"
• Install the intake pipes.
"
Use the new O-ring to prevent air from scking through
the joint.
NOTE:
Face the "UP" mark on the intake pipe to the upper.
or equivalent