Suzuki Intruder VZR1800 Service Manual page 161

• Install the gasket 5 and cam chain tension adjuster cap bolt
6.
NOTE:
Click sound is heard when the cam chain tension adjuster cap
bolt is installed.
• Tighten the cam chain tension adjuster cap bolt to the speci-
fied torque.
# Cam chain tension adjuster cap bolt:
"
After installing the cam chain tension adjuster, check
to be sure that the adjuster works properly by check-
ing the slack of cam chain.
• After installing the cam chain tension adjuster, rotate the
crankshaft (some turns), and recheck the positions of the
camshafts. (!3-106)
FRONT AND REAR CYLINDER HEAD COVER
• Pour engine oil in each oil pocket in the cylinder heads.
NOTE:
Be sure to check the valve clearance. (!2-8)
• Install the new gaskets to the cylinder head covers.
• Apply SUZUKI BOND to the cam end caps of the gaskets as
shown.
- 99104-31140: SUZUKI BOND "1207B" or equivalent
"
Use the new gaskets to prevent oil leakage.
• Place the cylinder head covers on the cylinder heads.
• Fit a new gasket 1 to each head cover bolts.
"
Use a new gasket to prevent oil leakage.
23 N·m (2.3 kgf-m, 16.5 lb-ft)
ENGINE 3-109