RF Vector Network Analyzer
N9923AN
Before You Begin
Before checking, verifying, or adjusting the analyzer, refer to the following paragraphs to:
• Make sure the operating environment is within 19 to 27 ° C and 5 to 95% humidity.
• Make sure that proper electrostatic discharge (ESD) protection is provided.
• Review the principles of connector care.
Protect Against Electrostatic Discharge (ESD)
This is important. If not properly protected against, electrostatic discharge can seriously
damage your analyzer, resulting in costly repair.
To reduce the chance of electrostatic discharge, follow all of the
CAUTION
recommendations outlined in
page
1-5, for all of the procedures in this chapter.
Allow the Analyzer to Warm Up
Before testing or adjusting the N9923AN analyzer, allow it to warm up as described under
"UUT Warmup" in the "Getting Started" section of the N7841A help file.
Service Guide N9923-90005
"Electrostatic Discharge Protection" on
Tests and Adjustments
Before You Begin
3-3