Summary Of Vlan Commands - Avaya G450 Manual

The following example displays the VLANs configured on the device:
G50-001(super)# show vlan
VLAN ID VLAN-name
------- --------------------------------
1 V1
54 Marketing
66 V66
2121 Training
Total number of VLANs: 4

Summary of VLAN commands

For more information about these commands, see Avaya G450 CLI Reference, 03-300437.
Table 93: VLAN CLI commands
Root level
command
clear port
static-vlan
clear vlan
interface vlan
set port
static-vlan
set port vlan
set port
vlan-binding-mode
set trunk
set vlan
show cam vlan
show icc-vlan
First level Description
Command
Delete statically configured VLANs from the port
Delete an existing VLAN and its interface, remove
the entry from the VLAN table, and return ports from
this VLAN to the default VLAN 1
Create a VLAN interface, enter interface VLAN
configuration mode, or delete a VLAN interface
Set the current VLAN as the ICC-VLAN
icc-vlan
Assign a static VLAN to a port
Set the port VLAN ID (PVID)
Define the binding method used by ports
Configure the VLAN tagging mode of a port
Create or modify a VLAN
Display all MAC entries in the CAM table for a
specific VLAN
Display the current ICC VLAN
Configuring VLANs
1 of 2
Issue 1 January 2008 357