Power-Up Keypad Control Mode Reference - Control Techniques unidrive sp Advanced User's Manual

Parameter Keypad and Parameter
structure display x.00
1.51

Power-up keypad control mode reference

Drive modes Open-loop, Closed-loop vector, Servo
Bit SP
Coding
Range Open-loop, Closed-loop vector, Servo
Default Open-loop, Closed-loop vector, Servo
Update rate N/A
Selects the value of the keypad control mode (Pr 1.17) at power-up as follows:
0 rESEt zero
1 LASt last value used before power-down
2 PrS1 Preset 1, Pr 1.21, before power-down
Unidrive SP Advanced User Guide
Issue Number: 7
Parameter Advanced parameter
description format descriptions
FI DE Txt VM DP ND RA NC NV
1
0 to 2
0
www.controltechniques.com
http://nicontrols.com
Serial comms Electronic
Macros
protocol nameplate
PT US RW BU PS
1 1 1
Feature look-
Performance Menu 1
up table
35