Example For Powering Off The Sfu - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
19
20
21
22
23
24
25
26
27
28
----End
Configuration Files
None

10.14.2 Example for Powering off the SFU

When the SFU is faulty or you need to routinely maintain the SFU, you can power off the SFU.
Networking Requirements
You need to power off the SFUs before dust removing.
Configuration Roadmap
The configuration roadmap is as follows:
l
Data Preparation
To complete the configuration, you need the following data:
Slot number of the current SFU In this example, the slot number of the SFU is 19.
Procedure
Step 1 Power off the SFU in slot 19
<HUAWEI>
Caution!!! This command may affect operation by wrong use, please carefully use
it with HUAWEI engineer's direction. Are you sure to do this operation?[Y/N]?y
Step 2 Verify the configuration.
# Check the registration status of the SRU in slot 19. You can view that the SRU is in the
unregistered and abnormal state. It means that powering off the SRU succeeds.
<HUAWEI> display device
NE80E's Device status:
Slot #
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - -
5
6
Issue 02 (2011-09-10)
SFU Present
SFU Present
SFU Present
SFU Present
CLK Present
CLK Present
PWR Present
PWR Present
FAN Present
FAN Present
NOTE
SFUs are not supported on the X1 and X2 models of the NE80E/40E.
Power off the SFU.
power off slot 19
Type Online
LPU Present
LPU Present
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Register Status
Registered Normal
Registered Normal
10 Device Maintenance
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Primary
NA
NA
289