Huawei netengine80e Configuration Manual page 310

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Slave port status
Nap ip-pool/Mask
[RouterB-GigabitEthernet1/0/1] display nap interface
------------------------------------------------------
NAP master port list
Port count
------------------------------------------------------
Port property
Current status
Local port
Peer port
Local primary ip
Peer primary ip
Local secondary ip
Peer secondary ip
Hello time
Linked time
------------------------------------------------------
Step 3 Log in to the slave device from the master device.
# Configure Router B.
[RouterB-GigabitEthernet1/0/1] nap login neighbor
Trying 12.12.12.10 ...
Press CTRL+K to abort
Connected to 12.12.12.10 ...
Info: The max number of VTY users is 10, and the number
Step 4 Disable NAP on the slave device.
# Configure Router C.
<HUAWEI> system-view
[HUAWEI] sysname RouterC
[RouterC] undo nap slave enable
----End
Configuration Files
None
Issue 02 (2011-09-10)
: Enable
: 1
of current VTY users on line is 1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 10.167.253.0/24
: Master
: IP-ASSIGNED
: GigabitEthernet1/0/1
: GigabitEthernet1/0/1
: 12.12.12.5
: 12.12.12.6
: 12.12.12.9
: 12.12.12.10
: 3s
: 00:02:33
10 Device Maintenance
295