Board Maintence; Resetting A Board; Clearing The Maximum Cpu Usage - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
sfuboardindex-id command to change the number of the SFUs that the device requires for
registration.
----End

10.12 Board Maintence

Board Maintenance involves resetting a board and clearing the maximum CPU usage.

10.12.1 Resetting a Board

You need to back up important data before resetting a board.
Context
In the case that a board is faulty, you can use the
Back up important data before resetting the board.
Do as follows on the router:
Procedure
Step 1 Run:
reset slot
The board is reset.
----End

10.12.2 Clearing the Maximum CPU Usage

To recalculate the maximum CPU usage, you can clear the original statistics.
Context
The maximum CPU usage cannot be restored after you clear it. So, confirm the action before
you use the command.
Issue 02 (2011-09-10)
WARNING
slot-id [card card-id]
NOTE
l If this command is run to reset a master MPU and no slave MPU exists, the master MPU is reset with
the CPU being powered on. If a slave MPU exists, this command performs master/slave MPU
switchover.
l If the board is still abnormal after being reset, contact the Huawei technical support personnel.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Device Maintenance
reset slot command to reset the board.
281