Example For An Ssh Client In The Public Network To Access An Ssh Server In The Private Network - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
l
l
8.8.12 Example for an SSH Client in the Public Network to Access
an SSH Server in the Private Network
In this example, SSH attributes of users on the public network are configured so as to access the
SSH server on the private network through STelnet or SFTP.
Networking Requirements
As shown in
CE1 as an SSH server is located at a private network of AS 65410. The users in the public
network can safely access and manage CE1 on the private network through PE1.
The Huawei router functions as an SSH server. The client client001 is configured to log in to
the SSH server by using STelnet in the authentication mode of password; the client client002 is
configured to log in to the SSH server by using SFTP in the authentication mode of RSA.
Issue 02 (2011-09-10)
return
Configuration file of Client001 on the SSH client
#
sysname client001
#
interface GigabitEthernet1/0/1
ip address 10.10.2.2 255.255.0.0
#
ssh client first-time enable
#
return
Configuration file of Client002 on the SSH client
#
sysname client002
#
interface GigabitEthernet1/0/1
ip address 10.10.3.3 255.255.0.0
#
ssh client first-time enable
#
return
Figure 8-20, PE1 as an SSH client resides on an MPLS backbone network, and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Accessing Another Device
219