Displaying The Electronic Label; Displaying The Soft Boot Mode - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
In practice, using this command in any view, you can view the basic device information. Enter
slot-id to view information about the board in the specified slot.
l Choose a board in a certain slot. You can view basic information about this board.
l Run:
----End

10.11.3 Displaying the Electronic Label

The electronic label information includes the type of the board/card, bar code, BOM code,
English description, production date, supplier name, issuing number, Common Language
Equipment Identification (CLEI) code, and sales BOM code.
Procedure
Step 1 Run:
The electronic label is displayed.
In practice, using this command in the user view, you can view information about the electronic
label of the boards. Enter slot-id to view information about the electronic label of the board in
the specified slot.
Information displayed includes the type of the board and PIC card, bar code, BOM, English
description, production date, supplier name, issuing number, CLEI (Common Language
Equipment Identification) code, and sales BOM.
----End

10.11.4 Displaying the Soft Boot Mode

By default, the soft boot mode function is automatically enabled, which shortens the time spent
on system restart.
Procedure
Step 1 Run the
Issue 02 (2011-09-10)
display device pic-status
Basic information about the PIC card of the LPU is displayed.
NOTE
For the range of numbers of the slots on the router, refer to the HUAWEI NetEngine80E/40E Router
Hardware Description.
NOTE
You can back up the electronic label of the specified board in the following methods:
l Run the backup elabel
CF card on the router.
l Run the backup elabel ftp
up the electronic label to the specified FTP server.
display system soft-bootmode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
filename [ backplane | slot-id ] command to back up the electronic label to the
host filename username password [ backplane | slot-id ] command to back
command, you can view the soft boot mode.
10 Device Maintenance
275