Enabling The Telnet Redirection Function - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
l
Data Preparation
To log in to another device by using the Telnet redirection function, you need the following data:
No.
1

8.3.2 Enabling the Telnet Redirection Function

After the redirection function is enabled on the router that functions as a Telnet client, you can
log in to a remote device from a specified interface of the client to manage and maintain the
remote device.
Context
The Telnet redirection function is supported by the products whose AUX ports or TTY interfaces
can be configured with this function.
Perform the following steps on the router:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface
The AUX0 user interface is displayed.
Step 3 Run:
undo shell
Terminal services are disabled on the AUX0 user interface.
Step 4 Run:
redirect
The Telnet redirection function is enabled on the AUX0 user interface.
----End
Issue 02 (2011-09-10)
routeris directly connected with the remote device by configuring cable
Data
IP address of routerRouter A
aux 0
NOTE
l After the Telnet redirection function is enabled, the interface number used for redirection will be
assigned. AUX0 is numbered as 33, and the interface number is therefore 2033.
l You can log in to the remote device that needs to be managed and maintained from the Telnet client
by using the specified interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Accessing Another Device
161