HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
l
l
l
l
----End
Example
Run the
next startup.
<HUAWEI> display startup
MainBoard:
Configured startup system software:
Startup system software:
Next startup system software:
Startup saved-configuration file:
Next startup saved-configuration file:
Startup paf file:
Next startup paf file:
Startup license file:
Next startup license file:
Startup patch package:
Next startup patch package:
7.4 Configuration Examples
This section provides an example for configuring system startup.These configuration examples
explain networking requirements, configuration roadmap, and configuration notes.
7.4.1 Example for Configuring System Startup
This section provides an example for configuring system startup. In this example, the
configuration file is saved and the system software and configuration file to be loaded during
the next startup are specified so that the router can start in a required manner.
Networking Requirements
The router is installed with double main control boards. After the router is configured, new
configurations take effect after the system restarts.
Configuration Roadmap
The configuration roadmap is as follows:
1.
Issue 02 (2011-09-10)
Run the
display current-configuration
[ configuration-instance ] ] | controller | interface [ interface-type [ interface-number ] ] ]
[ feature feature-name [ filterfilter-expression ] | filterfilter-expression ] command to
check current configurations.
Run the
display saved-configuration
contents of the configuration file to be loaded during the next startup.
Run the
display startup
the next startup.
Run the
display current-configuration slave
slave board.
display startup
command to check information about the files to be used during the
Save the current configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
[ configuration [ configuration-type
[ last | time | configuration ] command to check the
command to check information about the files to be used during
command to check the configuration of the
cfcard:/V600R003C00SPC300.cc
cfcard:/V600R003C00SPC300.cc
cfcard:/V600R003C00SPC300.cc
cfcard:/vrp.cfg
cfcard:/vrp.cfg
default
default
default
default
NULL
NULL
7 Configuring System Startup
149