Configuring The Configuration File For Router To Load For The Next Startup; Checking The Configuration - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
The filename extension of the system software must be .cc and must be stored in the root directory
of a storage device.
Procedure
Step 1 Run:
startup system-software
The NE80E/40E system software for the router to load next time when it starts is configured.
You can specify the system-file and use the system software for the next startup that is saved on
the device.
slave-board is valid only on the router with dual main control boards.
----End
7.3.3 Configuring the Configuration File for Router to Load for the
Next Startup
Before restarting a router, you can specify the configuration files that are loaded for the next
startup.
Context
You can run the
to be loaded during the next startup operation is specified. If no configuration file is specified,
the default configuration file is loaded during the next startup operation.
The filename extension of the configuration file must be .cfg or .zip, and must be stored in the
root directory of a storage device.
When the router turns on, it initiates by reading the configuration file from the cfcard memory
by default. Thus, the configuration in this configuration file is called initial configuration. If no
configuration file is saved in the cfcard, the router initiates with default parameters.
Procedure
l
----End

7.3.4 Checking the Configuration

After specifying a file for system startup, you can check the contents of the configuration file to
be loaded and the information about the file to be used during the next startup on the router.
Prerequisite
The file has been specified for system startup.
Issue 02 (2011-09-10)
system-file [ slave-board ]
display startup
Run:
startup saved-configuration
Configuration file is saved for the router to load next time on startup.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command on the router to check whether the configuration file
configuration-file
7 Configuring System Startup
148