Displaying The Power Supply Status; Displaying Current Information About Boards - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
Step 1 Run:
display voltage
The board voltage is displayed.
In practice, using this command in any view, you can view the voltage of all the boards. The
voltage information includes the following:
l Number of the voltage sensors
l Working voltage sensors
l Working status of the voltage sensors
l Alarm field value of the voltage
l Actual board voltage
l Normal working temperature of the voltage sensors
----End

10.11.10 Displaying the Power Supply Status

The power supply information includes the slot ID of the power supply module, whether the
power supply module is registered, working mode of the power supply module, and cable status
of the power supply module.
Procedure
Step 1 Run:
display
The power supply status is displayed.
In practice, using this command in any view, you can view the power supply status. The displayed
information includes the following:
l Slot number of the power supply module
l Presence status of the power supply module
l Operation mode of the power supply module
l Cable status of the power supply module
----End

10.11.11 Displaying Current Information About Boards

Context
Do as follows on the router.
Issue 02 (2011-09-10)
[ lpu | mpu | sfu | slot slot-id]
NOTE
l Run the display voltage
subcard on the specified LPU.
l Run the display voltage
power[{environment-info|manufacture-info}slot slot-id|slot[slot-id]]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
[lpu | slot slot-id [pic pic-id]] command to view the voltage of the specified
command to view the voltage of all the boards on the router.
10 Device Maintenance
278