Huawei netengine80e Configuration Manual page 148

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Figure 6-1 Networking for performing file operations by using FTP
PC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure the IP address of the FTP server.
[server] interface gigabitethernet1/0/1
[server-GigabitEthernet1/0/1] undo shutdown
[server-GigabitEthernet1/0/1] ip address 10.137.217.221 255.255.0.0
[server-GigabitEthernet1/0/1] quit
Step 2 Enable the FTP server.
<HUAWEI> system-view
[HUAWEI] sysname server
[server] ftp server enable
[server] ftp timeout 30
Step 3 Configure the authentication information, authorization mode, and authorized directories for an
FTP user on the FTP server.
[server] aaa
[server-aaa] local-user huawei password simple huawei
[server-aaa] local-user huawei service-type ftp
[server-aaa] local-user huawei ftp-directory cfcard:
[server-aaa] quit
Step 4 Run the FTP commands at the windows command line prompt, and enter the correct user name
and password to set tup an FTP connection with the FTP server.
Issue 02 (2011-09-10)
Network
Configure the IP address of the FTP server.
Enable the FTP server.
Configure the authentication information, authorization mode, and directories to be
accessed for an FTP user.
Log in to the FTP server by using the correct user name and password.
Upload files to or download files from the FTP server.
IP address of the FTP server, that is, 10.137.217.221
Timeout period for the FTP connection, that is, 30 minutes
FTP username as huawei and password as huawei on the server
The destination file name and its position in the FTP client
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
10.137.217.221/16
FTP Server
6 Managing File System
133