Performing File Operations By Means Of Ftp - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
l
l
l
----End

6.3 Performing File Operations by Means of FTP

FTP can transmit files between local and remote hosts, and is widely used for version upgrade,
log downloading, file transmission, and configuration saving.
Issue 02 (2011-09-10)
NOTE
If the current directory is not the parent directory, you must operate the file by using the absolute
path.
Run:
reset recycle-bin [ filename ]
The file is deleted.
You can permanently delete files in the recycle bin.
Running Files in Batch
You can upload the files and then process the files in batches. The edited batch files need
to be saved in the storage devices on the router.
When the batch file is created, you can run the batch file to implement routine tasks
automatically.
1. Run:
system-view
The system view is displayed.
2. Run:
execute filename
The batched file is executed.
Configuring Prompt Modes
The system displays prompts or warning messages when you operate the device (especially
the operations leading to data loss). If you need to change the prompt mode for file
operations, you can configure the prompt mode of the file system.
1. Run:
system-view
The system view is displayed.
2. Run:
file prompt { alert | quiet }
The prompt mode of the file system is configured.
By default, the prompt mode is alert.
CAUTION
If the prompt is in the quiet mode, no prompt appears for data lossdue to maloperation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Managing File System
111