Example For Logging In To Another Device By Using Telnet On A Vpn - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Step 3 View the port number.
<RouterA> display tcp status
TCPCB
37b26538
37b20808
15b8a270
32fa2744
32facdac
32f9e4b4
2ff6bbcc
Step 4 Verify the configuration.
Run the telnet 10.1.1.1 2033(or 4033) command on the PC to log in to Router B.
----End
Configuration Files
l
8.8.3 Example for Logging in to Another Device by Using Telnet on
a VPN
This section provides an example for logging in to another device by using Telnet on a VPN.In
this example, the authentication mode and password are configured for users on a VPN so as to
log in to the router through Telnet.
Networking Requirements
As shown in
to Router A from Router B through Telnet.
Figure 8-9 Networking diagram for logging in to another device by using Telnet on a VPN
Issue 02 (2011-09-10)
Tid/Soid Local Add:port
6 /1 0.0.0.0:21
135/4 0.0.0.0:22
135/1 0.0.0.0:23
135/15 0.0.0.0:2033
135/17 0.0.0.0:4033
88 /1 0.0.0.0:6000
135/9 10.137.217.226:23
Configuration file of Router A
#
sysname RouterA
#
interface Aux0/0/1
undo shutdown
#
interface GigabitEthernet1/0/1
undo shutdown
ip address 10.1.1.1 255.255.255.0
#
user-interface con 0
user-interface aux 0
undo shell
redirect
#
return
Figure 8-9, Router A and Router B can ping through each other. Users can log in
GE1/0/0
1.1.1.1 24
RouterA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Foreign Add:port
0.0.0.0:0
0.0.0.0:0
0.0.0.0:0
0.0.0.0:0
0.0.0.0:0
0.0.0.0:0
10.138.77.21:2993
GE1/0/0
1.1.1.2 24
VPN tt
IP Network
8 Accessing Another Device
VPNID State
23553 Listening
23553 Listening
23553 Listening
23553 Listening
23553 Listening
23553 Listening
0
RouterB
Established
187