Huawei netengine80e Configuration Manual page 330

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Upload the patch file for the system software.
# Log in to the FTP server.
<PE> ftp 10.1.1.2
Trying 10.1.1.2 ...
Press CTRL+K to abort
Connected to 192.168.1.2.
220 FTP service ready.
User(10.1.1.2:(none)):huawei
331 Password required for huawei.
Password:
230 User logged in.
[ftp]
# Configure the binary transmission format and the working directory of the CF card on PE.
[ftp] binary
200 Type set to I.
[ftp] lcd cfcard:/
% Local directory now cfcard:.
# Load the patch file for the current system software from the remote FTP server.
[ftp] get patch.pat
200 Port command okay.
150 Opening ASCII mode data connection for license.txt.
226 Transfer complete.
FTP: 6309 byte(s) received in 0.188 second(s) 33.55Kbyte(s)/sec.
[ftp] bye
221 Server closing.
<PE>
# Copy the patch file to the CF card on the slave MPU.
<PE> copy cfcard:/patch.pat slave#cfcard:/
Copy cfcard:/patch.pat to slave#cfcard:/patch.pat?[Y/N]:y
100%
Info:Copied file cfcard:/ patch.pat to slave#cfcard:/ patch.pat...Done
Step 2 Load the patch.
Issue 02 (2011-09-10)
Save the patch file to the root directory of the CF card on the master and slave MPUs.
Load the patch.
Activate the patch.
Run the patch.
File name of the patch: patch.pat
Path the patch saved to on the MPU: cfcard:/
complete
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Patch Management
315