Accessing The System By Using Ftp - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Step 4 Run:
quit
Return the system view.
Step 5 Run:
ftp
The basic FTP ACL is configured.
----End

6.3.7 Accessing the System by Using FTP

After the FTP server is configured, you can access the router from the PC by using FTP to manage
the files on the router.
Context
If you need to log in to the router by using FTP, you can use either windows command line
prompt or a third-party software. Here uses the windows command line prompt as an example.
Do as follows on the PC:
Procedure
Step 1 Use the windows command line.
Step 2 Run the ftp ip-address command to log in to the router by using FTP.
Enter the user name and password at the prompt, and press Enter. When the windows command
line prompts are displayed in the FTP client view, such as ftp>, you have entered the working
directory of the FTP server.
----End
Issue 02 (2011-09-10)
[ ipv6 ] acl acl-number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Managing File System
116