Specifying A File For System Startup; Establishing The Configuration Task; Configuring System Software For A Router To Load For The Next Startup - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Next startup saved-configuration file:
Startup paf file:
Next startup paf file:
Startup license file:
Next startup license file:
Startup patch package:
Next startup patch package:

7.3 Specifying a File for System Startup

You can specify a file for system startup by specifying the system software and configuration
file for the next startup of the router.

7.3.1 Establishing the Configuration Task

Before specifying a file for system startup, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
To enable the router to provide user-defined configurations during the next startup, you need to
correctly specify the system software and configuration file for the next startup.
Pre-configuration Tasks
Before specifying a file for the system startup, complete the following task:
l
Data Preparation
To specify a file for system startup, you need the following data.
No.
1
2
7.3.2 Configuring System Software for a router to Load for the Next
Startup
To upgrade the system software of a router, you can specify the NE80E/40E system software to
be loaded for the next startup.
Context
If no system software is specified for the next startup operation of the router, the system software
loaded this time will be started during the next startup operation. To change system software for
the next startup operation, you need to specify the required one.
Issue 02 (2011-09-10)
Installing the router and powering it on properly
Data
System software and its file name on the NE80E/40E
Configuration file and its file name on the NE80E/40E
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring System Startup
cfcard:/vrp.cfg
default
default
default
default
NULL
NULL
147