Operating Files By Using Ftp Commands - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
l If the IP address of the server is an IPv6 address, do as follows:
----End

8.6.4 Operating Files by Using FTP Commands

After logging in to a FTP server, you can operate files by using FTP commands. File operations
include configuring a file transmission method, checking online help about FTP commands,
uploading or downloading files, and managing directories and files.
Context
After logging in to the FTP server, you can perform the following operations:
l
l
l
l
l
After logging in to the router that functions as a client and entering the FTP client view, you can
perform the following steps:
Procedure
l
Issue 02 (2011-09-10)
NOTE
Before logging in to the FTP server, you can run the
command to configure a default VPN instance. After that, the default VPN instance is used
in the FTP operation.
– In the user view, establish a connection to the FTP server.
Run:
ftp ipv6 host [ port-number ]
The router is connected to the FTP server.
– In the FTP view, establish a connection to the FTP server.
1. In the user view,Run:
ftp
The FTP view is displayed.
2. Run:
open ipv6 host-ipv6-address [ port-number ]
The router is connected to the FTP server.
Configure a data type for transmission files and a file transmission method.
Check the online help about FTP commands in the FTP client view.
Upload local files to the remote FTP server, or download files from the FTP server and
save them locally.
Create directories on or delete directories from the FTP server.
Display information about a specified remote directory or a file of the FTP server, or delete
a specified file from the FTP server.
Configuring data type and transmission mode for the file.
– Run:
ascii | binary
The data type of the file to be transmitted is ascii or binary mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Accessing Another Device
set net-manager vpn-instance
173