Switching Between The Operation Modes Of The Lpuf-10; Establishing The Configuration Task - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Context
Run the following command to check the previous configuration.
Procedure
Step 1 Run the
----End
Example
# View the current PIC cards on the device.
<HUAWEI> display device pic-status
Pic-status information in Chassis 1:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SLOT PIC Status
7
7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10.7 Switching Between the Operation Modes of the
LPUF-10
You can run a command to configure the LPUF-10 to work in either FR or ATM mode.

10.7.1 Establishing the Configuration Task

Before configuring the operation mode of the LPUF-10, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Application Environment
When configuring FR or ATM services on the LPUF-10, you need to manually switch the
operation mode of the LPUF-10. An LPUF-10 can operate in either of the following modes:
l
l
Pre-configuration Tasks
Before switching the operation mode of the LPUF-10, complete the following task:
l
Issue 02 (2011-09-10)
display device pic-status command to view the current PIC cards on the device.
Type
0 Registered LAN_WAN_2x10GX_V_CARD
6 Registered ETH_8xGF_B_CARD
NOTE
LPUF-10 is not supported on the X1 and X2 models of the NE80E/40E.
support-atm mode
When operating in support-atm mode, the LPUF-10 can support ATM services, instead of
FR services.
support-fr mode
When operating in support-fr mode, the LPUF-10 can support FR services, instead of ATM
services.
Identifying the current operation mode of the LPUF-10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Device Maintenance
Port_count Init_result
2 SUCCESS
8 SUCCESS
Logic down
SUCCESS
SUCCESS
266