Performing File Operations By Means Of Xmodem - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
l
----End
Example
Run the
clinet001 is authenticated by password.
[HUAWEI] display ssh user-information client001
If no SSH user is specified, information about all SSH users logging in to an SSH server will be
displayed.
Run the
<HUAWEI> display ssh server status
SSH version
SSH connection timeout
SSH server key generating interval : 2 hours
SSH Authentication retries
SFTP server
Stelnet server
SSH server port
Run the
SSH server and SSH clients.
<HUAWEI> display ssh server session
Session 2:

6.5 Performing File Operations by Means of Xmodem

This section describes how to transfer files through XModem.
Issue 02 (2011-09-10)
Run the display ssh server
connection sessions with SSH clients.
display ssh user-information
User Name
Authentication-type
User-public-key-name
Sftp-directory
Service-type
Authorization-cmd
display ssh server
NOTE
If the default interception port is in use, information about the current interception port is not displayed.
display ssh server
Conn
Version
State
Username
Retry
CTOS Cipher
STOC Cipher
CTOS Hmac
STOC Hmac
Kex
Service Type
Authentication Type
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
session command on the SSH server to check information about
username command. It shows that the SSH user named
: client001
: password
: -
: -
: sftp
: No
status command to view global configurations of an SSH server.
: 1.99
: 60 seconds
: 5 times
: Enable
: Enable
: 55535
session command to view information about sessions between the
: VTY 4
: 2.0
: started
: client002
: 1
: aes128-cbc
: aes128-cbc
: hmac-md5
: hmac-md5
: diffie-hellman-group-exchange-sha1
: sftp
: password
6 Managing File System
129