Huawei netengine80e Configuration Manual page 180

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rsa peer-public-key
The public key view is displayed.
Step 3 Run:
public-key-code begin
The public key editing view is displayed.
Step 4 Run:
hex-data
The public key is edited.
The public key must be a string of hexadecimal alphanumeric characters. It is automatically
generated by an SSH client. You can run the
view a generated public key.
Step 5 Run:
public-key-code end
Quit the public key editing view.
l If the specified hex-data is invalid, the public key cannot be generated after the
l If the specified key-name is deleted in other views, the system prompts that the key does not
Step 6 Run:
peer-public-key end
Return to the system view from the public key view.
Step 7 Run:
ssh client
The RSA public key is assigned to the SSH server.
----End
Issue 02 (2011-09-10)
key-name
NOTE
Before being assigned to the SSH server, the assigned peer RSA public key must be obtained from the SSH
server and must be configured on the SSH client. Then, the STelnet client client can successfully undergo
the validity check on the RSA public key of the SSH server.
key end command is run.
exist after the peer-public-key end
servername assign rsa-key keyname
NOTE
If the RSA public key stored on the SSH client becomes invalid, run the
assign rsa-key command to cancel the association between the SSH client and the SSH server. Then, run
the ssh client servername assign rsa-key keyname command to allocate a new RSA public key to the SSH
server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
display rsa local-key-pair public
command is run and the system view is displayed.
8 Accessing Another Device
command to
peer-public-
undo ssh client servername
165