Example For Accessing Files On Another Device By Using Sftp - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Connected to 1.1.1.1
220 FTP service ready.
User(ftp 1.1.1.1:(none)):huawei
331 Password required for huawei
Password:
230 User logged in.
Step 2 Configure the transmission mode to the binary format and configure the directory of the cfcard
memory on the router..
[ftp] binary
200 Type set to I.
[ftp] lcd cfcard:/
Info: Local directory now cfcard:.
Step 3 Download the newest system software from the remote FTP server on the router.
[ftp] get V600R003C00SPC300.cc
200 Port command okay.
150 Opening ASCII mode data connection for V600R003C00SPC300.cc.
226 Transfer complete.
FTP: 1127 byte(s) received in 0.156 second(s) 7.22Kbyte(s)/sec.
[ftp] quit
----End
Configuration Files
None.

8.8.9 Example for Accessing Files on Another Device by Using SFTP

In this example, the local key pairs are generated on the SFTP client and the SSH server
respectively; the public RSA key is generated on the SSH server and bind the RSA public key
to the SFTP client. In this manner, the SFTP client can connect to the SSH server.
Networking Requirements
As shown in
can log in to the SSH server with the password, RSA, password-rsa, or all authentication. In this
example, the Huawei router functions as an SSH server.
Two users client001 and client002 are configured to log in to the SSH server in the authentication
mode of password and RSA respectively.
Figure 8-17 Networking diagram for accessing files on another device by using SFTP
10.10.2.2/16
Issue 02 (2011-09-10)
Figure 8-17, after the SFTP service is enabled on the SSH server, the SFTP Client
SSH Server
GE1/0/1
10.10.1.1/16
GE1/0/1
Client 001
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
10.10.3.3/16
Client 002
8 Accessing Another Device
202