HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
Step 1 Run:
display alarm
Information about the alarm is displayed.
In the operation, using this command in any view, you can view current information about the
alarm of the router. Alarm information includes the following:
l Alarm level
l Alarm date and time
l Alarm description
----End
10.11.8 Displaying the Board Temperature
The temperature information includes the temperature status of each board, temperature alarm
thresholds of a board, and actual temperature of a board.
Procedure
Step 1 Run:
display temperature
The temperature of the specified board is displayed.
In practice, using this command in any view, you can view the current temperature of the
router.The temperature information includes the following:
l Current temperature status of the board
l Threshold to the alarm temperature of the board
l Actual temperature of the board
----End
10.11.9 Displaying the Board Voltage
The voltage information includes the number of voltage sensors on each board, working voltage
sensor of each board, working status of the voltage sensor on each board, and voltage alarm
thresholds of each board.
Issue 02 (2011-09-10)
{ slot-id | all }
NOTE
After displaying the alarm of the router, you can run the
trap } command to clear the alarm at the specified index-id.
[ lpu | mpu | sfu | slot slot-id ]
NOTE
l Run the
display temperature
specified subcard in the specified slot.
l Run the
display temperature
the router.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
clear alarm index
[ lpu slot slot-id [ pic pic-id ] ] command to view the temperature of the
command to view the temperature of each module of all the boards on
10 Device Maintenance
index-id { send-trap | no-
277