Connecting To Another Device By Using The Telnet Redirection Function; Establishing The Configuration Task - Huawei netengine80e Configuration Manual

Hide thumbs Also See for netengine80e:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
8.3 Connecting to Another Device by Using the Telnet
Redirection Function
If the client is not connected to the remote device on an IP network, you can manage the device
by using the Telnet redirection function on the router.

8.3.1 Establishing the Configuration Task

Before establishing the configuration task of redirecting the client login to another device,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain the required data. This can help you complete the configuration task quickly and
accurately.
Applicable Environment
If a remote device needs to be managed and maintained but is not connected with the terminal
PC on the IP network, such as a new device on the network, you can log in to the remote device
from a router by using the Telnet redirection function.
The remote device can be a device that supports serial interfaces, such as a router, a switch, or
a modem.
Figure 8-6 Schematic diagram of redirecting the client login to another device by using Telnet
PC
As shown in
If Router B needs to be managed remotely, you can use the Telnet redirection function of
Router A. That is, connect the asynchronous serial interface of Router A to the serial interface
of Router B. This allows you to run the Telnet client program on the PC to log in to Router B
by using a specified interface, and thus to manage and maintain the device remotely.
Router B in the diagram above has been configured with serial interfaces. Router A is directly
connected with Router B.
Pre-configuration Tasks
Before redirecting the client to another device by using Telnet, complete the following tasks:
l
l
Issue 02 (2011-09-10)
Network
Figure
8-6, remote Router B is not connected with the client over the IP network.
Configuring a reachable route between the client and Router A
Powering on the remote device
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Session
Aux
Console
RouterA
RouterB
8 Accessing Another Device
160

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents